Charm Mount Types
Here are the instructions for each:
- Clasp Mount: Simply attach it to anything you want :) If you have a S3D wrist strap, it attaches nicely to the thin string at the top of the strap.
- Headphone Jack Mount: This one is easy too! Just plug it in to your headphone jack and you are good to go. I would avoid twisting it once it is inserted just so you don't damage any of the internals. Remember, this one is not compatible with the S3D Store Minimalist Hard Case.
- Screw-in Strap Mount: Continue below for detailed instructions...
Screw-in Strap Mount Charm Instructions
Step 1
Pick which side of the device you want to install the charm on.
Use either the bottom right or bottom left screw.
DO NOT use any other location.
Step 2
Unscrew the selected screw using the included screwdriver. Place the original screw somewhere where you won't lose it.
I recommend storing the original screw inside the plastic bag your charm came in :)
Step 3
Screw in the screw that comes attached to the charm. Gently push into the screw while screwing for a good grip and to avoid stripping it.
Screw it in until it is snug and fully seated, but not too tight to avoid stripping the plastic hole!
